Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
    4.1. Fuel system with the carburettor
      4.1.1. The fuel pump
      4.1.2. The gauge of level of fuel in a tank
      4.1.3. A fuel tank
      4.1.4. Removal and carburettor installation
      4.1.5. Carburettor dismantling
      4.1.6. Carburettor work
      4.1.7. Carburettor adjustment
      4.1.8. Starting arrangement OVAD
      4.1.9. The subsequent cooling of the engine
      4.1.10. An inlet collector
      4.1.11. A final collector
    4.2. One-dot systems of injection of fuel
    4.3. Multidot systems of injection of fuel
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


4.1.4. Removal and carburettor installation
THE GENERAL DATA

Installation fixing brackets on an accelerator cable


PERFORMANCE ORDER
1. In a motor compartment to remove a cable of an accelerator from the lever throttle заслонки and an external cover of a cable from a condensing ring (fastening of a cable of an accelerator on the lever throttle заслонки is shown by an arrow in drawing at the left, fastening of an external cover of a cable – in drawing on the right).
2. In car salon to remove an upholstery under the panel of devices from outside the driver.
3. To remove a cable of an accelerator from a pedal of management of fuel giving (an arrow cable fastening to a pedal is shown).
4. To remove a cover of a cable from a clamp and to adhere to a cable a cord which is required for a cable tightening into place.
5. To extend an accelerator cable in a motor compartment and to untie a cord from a cable.