Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
4.1. Fuel system with the carburettor
4.1.1. The fuel pump
4.1.2. The gauge of level of fuel in a tank
4.1.3. A fuel tank
4.1.4. Removal and carburettor installation
4.1.5. Carburettor dismantling
4.1.6. Carburettor work
4.1.7. Carburettor adjustment
4.1.8. Starting arrangement OVAD
4.1.9. The subsequent cooling of the engine
4.1.10. An inlet collector
4.1.11. A final collector
4.2. One-dot systems of injection of fuel
4.3. Multidot systems of injection of fuel
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. To remove the carburettor. |
| 2. To disconnect a hose of the vacuum amplifier of brakes from a collector. |
| 3. To disconnect a hose of system of ventilation from a collector. |
| 4. To unscrew a bolt from a suspension bracket of a pipe of a butterdish. |
|
5. To unscrew nuts of fastening of a collector, then to separate a collector from a head and to take from a motor compartment. To pay attention that on engines XU the central part of a collector in addition fastens one nut (it is specified by an arrow). |
|
Installation
| PERFORMANCE ORDER |
Installation is made in sequence, return to removal, taking into account following moments:
– To check up that interfaced surfaces of a collector and a head pure and dry. To establish a new lining of a collector on a thin layer of hermetic;
– To establish a collector, and to tighten nuts of fastening by the demanded moment;
– To establish the carburettor;
– If necessary to add cooling liquid in cooling system. |
|
|
|