Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
    4.1. Fuel system with the carburettor
      4.1.1. The fuel pump
      4.1.2. The gauge of level of fuel in a tank
      4.1.3. A fuel tank
      4.1.4. Removal and carburettor installation
      4.1.5. Carburettor dismantling
      4.1.6. Carburettor work
      4.1.7. Carburettor adjustment
      4.1.8. Starting arrangement OVAD
      4.1.9. The subsequent cooling of the engine
      4.1.10. An inlet collector
      4.1.11. A final collector
    4.2. One-dot systems of injection of fuel
    4.3. Multidot systems of injection of fuel
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


4.1.3. A fuel tank
THE GENERAL DATA

Connector сапуна a fuel tank

8 – a cover,

9 – central consolidation,

10 – a hose

Removal

PERFORMANCE ORDER
1. Before removal of a fuel tank, it is necessary to merge all fuel.
2. To remove system of release of the fulfilled gases and heat resisting screens.
3. To remove a cable of a manual brake.
4. To remove a socket of electroconducting from the gauge of level of fuel.
5. To remove on the right side of a fuel tank a pipe of a mouth and сапун. Some hoses сапуна are connected by quick disconnect connections.
6. To remove on the right side, submitting and returnable hoses and to muffle their stoppers.
7. A jack to prop up a fuel tank and to unscrew fastenings of a fuel tank.
8. Slowly to lower a fuel tank, and to remove the remained connections.

Installation

PERFORMANCE ORDER
Installation is made in sequence of return to removal, thus it is necessary to check up that at installation of the fuel tank, any of hoses has not appeared pressed.