Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
   9.1. A technical characteristics
   9.2. Removal of power shafts
   9.3. Power shaft installation
   9.4. Replacement of covers of hinges of equal angular speeds
   9.5. Replacement of the intermediate bearing of the right power shaft
   9.6. A drive on forward wheels with the power unit 4 х 4
   9.7. A drive on back wheels with the power unit 4 х 4
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


9.7. A drive on back wheels with the power unit 4 х 4
THE GENERAL DATA

Actions on removal and installation driving the bridge are not labour-consuming. It is necessary to observe the tightening moments.

Removal and power shaft installation

PERFORMANCE ORDER
1. To lift the corresponding party of the car and to merge oil from the bridge.
2. To remove a wheel, to take pin and a protective casing of a nut of a power shaft.
3. By means of the lever to fix a nave and to weaken a power shaft nut.
4. To unscrew a power shaft nut.
5. To unscrew bolts of fastening of the case of the bearing (are specified by arrows) from the interior of the lever.
6. To remove a nave from a power shaft.
7. Installation consists in performance of actions in return sequence in relation to removal process, and at first it is necessary to replace a sealing ring of a power shaft in картере driving the bridge. Last operation is oil pouring in the bridge.