Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
   9.1. A technical characteristics
   9.2. Removal of power shafts
   9.3. Power shaft installation
   9.4. Replacement of covers of hinges of equal angular speeds
   9.5. Replacement of the intermediate bearing of the right power shaft
   9.6. A drive on forward wheels with the power unit 4 х 4
   9.7. A drive on back wheels with the power unit 4 х 4
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





9.3. Power shaft installation
THE GENERAL DATA

To clear Slots for a power shaft in a nave and a transmission. To grease with a thin layer of greasing working edges of a sealing ring, Slots a power shaft and flanges.

THE LEFT POWER SHAFT


PERFORMANCE ORDER
1. To establish a power shaft in differential, having combined Slots a power shaft with flutes of semiaxial gear wheels of differential. To insert a power shaft into a transmission against the stop.
2. To establish the external end of a power shaft in a nave.
3. To connect bottom шарнирное connection with the lever.
4. To establish a new nut of fastening swivel connections and to tighten its demanded moment. To grease an inside and a carving of a nut of fastening of a power shaft with pure engine oil, to screw it on a power shaft and to tighten the demanded moment. To check up that the nave rotates freely then to establish a blocking washer and to fix its R-shaped pinом.
5. To connect the stabilizer of cross-section stability to the bottom lever, and to tighten the demanded moment.
6. To establish gauge ABS.
7. To establish a wheel, then to lower the car on the earth and definitively to tighten bolts the demanded moment.
8. To check up oil level in a transmission and if necessary to add.

THE RIGHT POWER SHAFT

PERFORMANCE ORDER
1. To check up that the intermediate bearing rotates easily and in regular intervals and is absent backlash an external ring in relation to the internal.
2. To grease with a thin layer of greasing an external ring of the intermediate bearing and an internal ledge for a dustproof cover.
3. To insert the internal end of a shaft through a suspension bracket of installation of the intermediate bearing and to establish a dustproof cover on a power shaft.
4. To combine internal Slots a power shaft with grooves of a semiaxial gear wheel of differential, the intermediate bearing with a suspension bracket of installation and to insert a power shaft against the stop into a transmission.
5. To establish the external hinge of equal angular speeds in a nave.
6. To check up correctness of installation of the intermediate bearing, then to turn bolts on 90 and to fix them in this position by nuts. To close the intermediate bearing a dustproof cover.
7. To connect bottom шарнирное connection with the lever.
8. To establish a new nut of fastening swivel connections and to tighten its demanded moment. To grease an inside and a carving of a nut of fastening of a power shaft with pure engine oil, to screw it on a power shaft and to tighten the demanded moment. To check up that the nave rotates freely then to establish a blocking washer and to fix its spring R-shaped pinом.
9. To connect the stabilizer of cross-section stability to the bottom lever, and to tighten the demanded moment.
10. To establish gauge ABS.
11. To establish a wheel, then to lower the car on the earth and definitively to tighten bolts the demanded moment.
12. To check up oil level in a transmission and if necessary to add.
13. To establish the bottom casing (equipment in some versions).