Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
   9.1. A technical characteristics
   9.2. Removal of power shafts
   9.3. Power shaft installation
   9.4. Replacement of covers of hinges of equal angular speeds
   9.5. Replacement of the intermediate bearing of the right power shaft
   9.6. A drive on forward wheels with the power unit 4 х 4
   9.7. A drive on back wheels with the power unit 4 х 4
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


9.5. Replacement of the intermediate bearing of the right power shaft
THE GENERAL DATA
The prevention

For bearing removal it is necessary to use a special stripper.

PERFORMANCE ORDER
1. To remove the right power shaft.
2. To check up a condition of the bearing which should rotate easily and in regular intervals and should not have backlashа between an internal and external ring. If necessary to replace the bearing.
3. Using a universal stripper with the big course, to remove the intermediate bearing from a power shaft. To grease an internal ring of the new bearing and using a hammer and a corresponding tube which rests against an internal ring of the bearing, to establish the new bearing on a power shaft.
4. To check up, that the bearing rotated easily and in regular intervals.