Peugeot405
1. The maintenance instruction
   1.2. Controls, devices and the equipment
   1.3. Keys
   1.4. Pressure in tyres.
   1.5. Doors
   1.6. A mouth of a fuel tank, a luggage carrier, a cowl
   1.7. Seat belts
    1.8. Seats
      1.8.1. Forward seats
      1.8.2. Back seats
   1.9. The panel of devices
   1.10. Illumination and the alarm system
   1.11. The proof-reader of light of headlights
   1.12. Washers and cleaners of glasses
   1.13. The additional equipment
   1.14. Comfort maintenance
    1.15. Internal heating and ventilation
   1.16. Combinations of devices
   1.17. Start of the petrol engine
   1.18. Start of the diesel engine
   1.19. Control bulbs and indexes
   1.20. A steering wheel, a gear change and a brake
   1.21. An automatic transmission
   1.22. Wheel replacement
   1.23. Towage
   1.24. Car identification
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





1.8.2. Back seats
THE GENERAL DATA

Cars with a type body combi are equipped by continuous sitting or two seats with separating backs.

To incline a back seat forward before horizontal position, it is necessary to pull for an average thong (1) or for thongs (3) and to lift a pillow of back sitting in vertical position.

For back lowering (or backs) it is necessary to unblock it, inclining the element of management located sideways (2 or 4).

When the back is lowered and is in horizontal position, it is necessary to establish correctly a management element разблокированием (5). It should serve simultaneously as a prop protecting from moving of a back downwards.