1.10. Illumination and the alarm system

THE GENERAL DATA

The switch of external illumination, indexes of turns and sound signal is under a steering wheel on the left side.

1 – illumination and the alarm system in position 0, 1 or 2 switches, 2 – change of intensity of illumination of a combination of devices

The alarm system light

To pull the switch lever on itself.

Indexes of turns

For the alarm system about intention of change of movement to the right or to the left it is necessary to move the switch lever upwards or downwards (in a plane parallel to a steering wheel). For the notification about intention of crossing or lane change it is not necessary to move the switch up to the end, overcoming resistance. Upon termination of maneuver it is necessary to weaken pressure upon the switch lever.

Sound signal

To press an end face of the switch of illumination.

Change of intensity of illumination of a combination of devices

For adjustment of illumination of a combination of devices it is necessary to use the handle placed under a steering wheel on a steering column.

3 – position 0: illumination is switched off; at engine start the fading passing light automatically joins 4 – position 1: forward and back dimensional fires (a control bulb on a combination of devices); it is necessary to turn the switch on a turn quarter forward 5 – position 2: near and far light of headlights (control bulbs on a combination of devices). To turn the switch against the stop. In this position to pull the switch handle in a steering wheel direction, overcoming resistance. It the headlight (and the control bulb on a combination of devices lights up) joins. For repeated inclusion of a passing light of headlights it is necessary to pull repeatedly the switch handle in a steering wheel direction