1. The maintenance instruction
   1.2. Controls, devices and the equipment
   1.3. Keys
   1.4. Pressure in tyres.
   1.5. Doors
   1.6. A mouth of a fuel tank, a luggage carrier, a cowl
   1.7. Seat belts
    1.8. Seats
   1.9. The panel of devices
   1.10. Illumination and the alarm system
   1.11. The proof-reader of light of headlights
   1.12. Washers and cleaners of glasses
   1.13. The additional equipment
   1.14. Comfort maintenance
    1.15. Internal heating and ventilation
   1.16. Combinations of devices
   1.17. Start of the petrol engine
   1.18. Start of the diesel engine
   1.19. Control bulbs and indexes
   1.20. A steering wheel, a gear change and a brake
   1.21. An automatic transmission
   1.22. Wheel replacement
   1.23. Towage
   1.24. Car identification
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment

1.20. A steering wheel, a gear change and a brake

1 – adjustment of position of a steering wheel,

2 – a manual brake,

3 – a gear change

Adjustment of position of a steering wheel (1)

For a raising or steering wheel lowering it is necessary to execute following actions:

 – To unblock a steering wheel pressing the lever located on a steering column on the left side;
 – To establish a steering wheel in desirable position;
 – To block, having pulled the lever on itself.

Manual brake (2)

For inclusion of a manual brake pull the lever upwards.

For deenergizing of a manual brake press the button in a lever end face, thus raise the lever upwards, and then lower it in a starting position.

Gear change (3)

The gear change scheme is on the handle of the lever of a gear change.

For reverse gear inclusion it is necessary to lift a ring located under the handle of the lever of a gear change.