1. The maintenance instruction
   1.2. Controls, devices and the equipment
   1.3. Keys
   1.4. Pressure in tyres.
   1.5. Doors
   1.6. A mouth of a fuel tank, a luggage carrier, a cowl
   1.7. Seat belts
    1.8. Seats
   1.9. The panel of devices
   1.10. Illumination and the alarm system
   1.11. The proof-reader of light of headlights
   1.12. Washers and cleaners of glasses
   1.13. The additional equipment
   1.14. Comfort maintenance
    1.15. Internal heating and ventilation
      1.15.1. Heating system and ventilation switches
   1.16. Combinations of devices
   1.17. Start of the petrol engine
   1.18. Start of the diesel engine
   1.19. Control bulbs and indexes
   1.20. A steering wheel, a gear change and a brake
   1.21. An automatic transmission
   1.22. Wheel replacement
   1.23. Towage
   1.24. Car identification
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment

1.15.1. Heating system and ventilation switches

Heating system and ventilation switches are located on the average console. Into their structure enter:

 – The lever (9) moved in a horizontal plane operating receipt of air;
 – Three round handles for management of an operating mode of the fan (6), temperature (7), distribution of air (8).

Management of receipt of air (9)
The lever in the left position: receipt is closed. Air does not arrive in the car. Air in the car is exposed to circulation. This position should be used only in exceptional cases, for example, for prevention of hit in the car of a dust or unpleasant smells.

The lever in the right position: receipt is opened.

Management of distribution of air (8)

Turning the handle counter-clockwise, it is possible to find following four positions:

 – Position: air goes only to lateral and average nozzles of ventilation;
 – Position: air goes only to feet;
 – Position: air goes on a windshield, lateral glasses and feet of passengers;
 – Position: air goes on forward and lateral glasses. For fast defrosting of glasses it is necessary to put temperature and fan handles on a maximum.

Management in temperature of air (7)

Mark in the handle in the left extreme position opposite a dark blue hyphen: deenergizing.

Handle turn clockwise: gradual increase in intensity of heating.

Mark in the handle in the right extreme position: the maximum intensity of heating.

Management of the fan (6)

Mark in the handle in extreme position after turn counter-clockwise: deenergizing.

Handle turn clockwise: gradual increase in quantity of submitted air.


On either side of the forward panel there are two exhaust outlets for air, closed by special lattices which allow to establish and regulate a direction of a stream of air.

Special exhaust outlets direct air on glasses when the handle of distribution of air (8) is in position or.