Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
    3.1. Petrol engines
    3.2. Diesel engines
    3.3. The petrol engine 1,4 дм3
    3.4. Ignition system
       3.4.1. Contactless system of ignition
       3.4.2. Compound system of ignition (ignition / fuel system)
         3.4.2.1. The ignition coil
         3.4.2.2. The Module-amplifier of system of ignition
         3.4.2.3. Removal of the distributor of ignition
         3.4.2.4. Installation of the distributor of ignition
       3.4.3. Direct system of ignition
4. Fuel system
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment


3.4.2.3. Removal of the distributor of ignition
PERFORMANCE ORDER
1. If it is necessary to improve access to the ignition distributor, to remove a measuring instrument of a stream of air.
2. To remove a wire of weight from the accumulator.
3. To remove from the ignition distributor a protective water-proof cover.
4. To unscrew screws of fastening of the distributor of ignition and to uncover.
5. If necessary to remove high-voltage wires from a cover and spark plugs.
6. On engines with 16 valves it is necessary to remove a plate closing spark plugs.
7. On engines with 8 valves to unscrew screws of fastening of the distributor and to remove the distributor.
8. On engines XU9J4 with 16 valves to unscrew three Torx-bolts, крепящих a rotor to a flange of a drive of a rotor and to remove a rotor.
9. To unscrew a bolt from the centre of a flange of a drive and to remove a flange.
10. To remove a plastic basic plate from an end face of a head of the block of cylinders.
11. To uncover the distributor on engine XU9J4 with 16 valves (1, 2, 3 and 4 – numbers of cylinders).