Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
5. Systems of greasing, cooling
6. Release system
   6.1. Removal and installation
   6.2. System of fall of toxicity of an exhaust
   6.3. The issue control картерных gases
   6.4. The control of the fulfilled gases
   6.5. The control of allocation of steams of fuel
   6.6. System of fall of toxicity of an exhaust
   6.7. The catalyst
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment





6.6. System of fall of toxicity of an exhaust
THE GENERAL DATA

THE CONTROL OF ISSUE OF CARTER

Components of this system do not demand attention, except for check of internal cleanliness and integrity of hoses.

THE CONTROL OF ALLOCATION OF STEAMS OF FUEL

Replacement of the canister of charcoal

PERFORMANCE ORDER
1. To lift a forward part of the car and to fix on supports.
2. To remove the left forward wheel.
3. To remove the left forward loose leaf of an arch of a wheel.
4. To disconnect hoses from the canister, marking their arrangement for correct installation on a former place.
5. To unscrew a bolt and to remove the canister from a clip on the body panel.
6. Installation is made in sequence, return to removal.

Replacement of the electromagnetic valve of cleaning

The cleaning valve is located in a hose going from the coal filter to an entrance aperture of a throttle. The valve can be established on a suspension bracket or can be simply fixed on hoses (depending on model).

PERFORMANCE ORDER
1. To remove a wire of weight from the accumulator.
2. At presence to unscrew a bolt from a valve suspension bracket, then to disconnect wire contact.
3. To disconnect hoses from the valve, marking their arrangement for correct installation on a former place.
4. Installation is made in sequence, return to removal.

Ljambda-gauge replacement

Depending on model the ljambda-gauge is located in a reception exhaust pipe or in the central section of the muffler.

PERFORMANCE ORDER

The prevention

The ljambda-gauge is fragile and will fail, if it to strike, disconnect power supplies or if to apply any обтирочные materials.


1. To lift a forward part of the car and to fix on supports.
2. To track electroconducting back from the ljambda-gauge to a socket and to disconnect a socket.
3. To unscrew the gauge and to remove it together with a lining.
4. Installation is made in sequence, return to removal.